AMR 1
Terms
undefined, object
copy deck
-
An important objective of the NAMP is to achieve and maintain maximum material
readiness. Which of the following statements reflects additional objectives of the NAMP?
1. Conservation of time
2. Safety and conservation of material - Safety and conservation of material
-
What is the purpose of the Aircraft Maintenance Department within an organization?
1. Perform scheduled maintenance on
assigned aircraft
2. Perform unscheduled maintenance on
assigned aircraft
3. Repair reported discrepanci -
Maintain assigned aircraft in a
Full-Mission-Capable state in support
of the units mission -
What are the major types of aircraft maintenance?
1. Organizational, intermediate, and
depot
2. Standard and special
3. Rework and upkeep
4. Scheduled and unscheduled - Rework and upkeep
-
Restorative work performed on an item of support equipment is considered what
type(s) of work?
1. Upkeep
2. Rework
3. Preventative
4. Special - Upkeep
-
A comprehensive depot-level inspection of selected aircraft structures and materials and correction of any critical defects is
what type of maintenance?
1. Upkeep
2. Special rework
3. Standard rework
4. Standard upkeep - Standard rework
-
Maintenance performed on aircraft or equipment to improve its specific function
is known as what type of maintenance?
1. Standard rework maintenance
2. Special rework maintenance
3. Organizational maintenance
4. Intermediat - Special rework maintenance
-
Preventive, restorative, or additive work performed on aircraft, equipment, and
support equipment by an operating unit is
what type of maintenance?
1. Upkeep
2. Rework
3. SDLM
4. Depot - Upkeep
-
Scheduled work is performed on an aircraft as a result of its completing a prescribed number of flying hours. What type of
maintenance is this?
1. Special upkeep
2. Special rework
3. Standard upkeep
4. Standard rework - Standard upkeep
-
The ability of an aircraft to perform its mission was changed by alteration without
regard to flying hours. What type of maintenance is this?
1. Special upkeep
2. Special rework
3. Standard upkeep
4. Standard rework - Special upkeep
-
Aircraft maintenance is divided into what total number of maintenance levels?
1. Five
2. Two
3. Three
4. Four - Three
-
Centralized local maintenance is performed
by which of the following activities?
1. Depot-level activities
2. Contractor plants
3. AIMDs
4. CMAs - AIMDs
-
Work performed by an operating unit on a
day-to-day basis in support of its own operations is known as what type of
maintenance?
1. Intermediate-level maintenance
2. Organizational-level maintenance
3. Special maintenance - Organizational-level maintenance
-
Servicing aircraft and preflight inspections
are actions that are performed at what level
of maintenance?
1. Depot
2. Special
3. Intermediate
4. Organizational - Organizational
-
Work performed in a centrally located
facility within a geographical area is known
as what type of maintenance?
1. Special maintenance
2. Depot-level maintenance
3. Intermediate-level maintenance
4. Organizational-leve - Intermediate-level
-
Work performed at an industrial-type facility is known as what type of
maintenance?
1. O-Level
2. I-Level
3. SDLM
3. None of these - SDLM
-
The Naval Aviation Maintenance Program
is sponsored and directed by what command?
1. NAVSUP
2. CNET
3. CNO
4. DCNO - CNO
-
Material and technical support for the
NAMP are provided by the cognizant systems command and which of the following commands?
1. NAVSUP
2. CNET
3. CNO
4. DCNO - NAVSUP
-
What type of relationship exists between a superior and a subordinate?
1. Special
2. Staff
3. Management
4. Line - Line
-
According to directives from higher authority, what officer directs the aircraft
maintenance department?
1. The assistant aircraft maintenance
officer
2. The aircraft maintenance officer
3. The quality assurance officer
- The aircraft maintenance officer
-
The functional management responsibilities for the planning, control, and production of the aircraft maintenance department rest
with which of the following officers?
1. Assistant aircraft maintenance officer
2. Aircraft division off - Aircraft maintenance officer
-
Which of the following officers ensures that
staff divisions at the organizational level
conform to established policies?
1. The assistant aircraft maintenance
officer
2. The staff division officer
3. The aircraft main -
The assistant aircraft maintenance
officer -
Assuring that high quality maintenance work is performed is a function of what division in an organizational-level
maintenance department?
1. Operations
2. Quality assurance
3. Administration
4. Material control - Quality assurance
-
Which of the following maintenance concepts allows you to regulate events
rather than be regulated by them?
1. Detection
2. Prevention
3. Suppression
4. Correction - prevention
-
Within an o-level maintenance activity, what part of the activity monitors, controls, and applies the MDS?
1. Admin
2. System administrator/analysis
3. Material control
4. Production control - system administrator/analysis
-
What officer is directly responsible for the
overall production effort and material support of the organizational-level
maintenance department?
1. The administration officer
2. The aircraft maintenance officer
3. The mainte - The maintenance material control officer
-
What branch or division is known as the nerve center of an organizational-level
maintenance department?
1. Material control
2. Maintenance control
3. Aircraft
4. Quality assurance - Maintenance control
-
The power plants, airframes, and aviator’s life support equipment branches belong to
what division of an organizational-level
maintenance department?
1. Aircraft
2. Line
3. Avionics/armament
4. Staff - Aircraft
-
If you work in electronics, instruments, or
armament, you are normally assigned to what division of an organizational-level
maintenance department?
1. Aircraft
2. Line
3. Avionics/armament
4. Operations - Avionics/armament
-
In an intermediate-level maintenance activity, what is the central point of the
maintenance effort?
1. Maintenance material control
2. Maintenance control
3. Quality assurance
4. Production control - Production control
-
Normally, the intermediate maintenance organization has a total of how many
production divisions?
1. Five
2. Six
3. Three
4. Four - Six
-
What system provides organizational and
intermediate maintenance activities with a
computer-based management information
system?
1. NADEP
2. NALCOMIS
3. MDS
4. NAVSUP - NALCOMIS
-
Maintenance managers need current status information to control the maintenance
effort. What system is designed to provide
maintenance managers with this information?
1. NMCS
2. PMCS
3. VIDS
4. FMCS - VIDS
-
The VIDS boards in each work center are verified with the maintenance control VIDS
board a minimum of how often?
1. Once each shift change
2. Twice each day
3. Once each day
4. Once each week - Once each day
-
After the personnel in maintenance control
complete the required blocks of a newly initiated VIDS/MAF, copies 1 and 5 are
forwarded to
1. quality assurance
2. material control
3. production control
4. the work center - the work center
-
If a check flight is required after the completion of a corrective action, notification must be given to what individual?
1. The quality assurance division officer
2. The material control supervisor
3. The maintenance material contro - The quality assurance division officer
-
After a discrepancy has been corrected, what should be done with copies 1 and 5 of
the VIDS/MAF?
1. Copy 1 should be sent to quality assurance, and copy 5 is placed in the work center files
2. Copy 1 should be sent to maintenance con -
Copy 1 should be sent to maintenance control, and copy 5 is placed in the
work center files -
At the intermediate level of maintenance, what copies of the VIDS/MAF are forwarded to the work center upon
component induction for repair?
1. Copies 1, 2, and 3
2. Copies 2, 3, and 4
3. Copies 1, 4, and 5
4. Copies 1, 3, and 4 - Copies 1, 4, and 5
-
A component goes into an AWP status at the intermediate level of maintenance.
What action is completed first with regard
to the component?
1. It is stored in the work center
2. It is properly packaged and preserved
3. It is strip - It is properly packaged and preserved
-
Information entered on MDS forms must always meet which of the following requirements?
1. Be typed
2. Be entered in pencil
3. Be accurate and complete
4. Be entered in pen - Be accurate and complete
-
On-equipment maintenance actions are documented on
1. NALCOMIS or a VIDS/MAF
2. WORK REQUEST or NALCOMIS
3. DCF VIDS/MAF
4. VIDS board - NALCOMIS or a VIDS/MAF
-
The portion of an inspection that involves
the search for defects is known as what
phase?
1. Search
2. Fix
3. Repair
4. Look - Look
-
An organizational code, the Julian date, a sequence number, and a suffix are part of what code or control number?
1. Action Taken code
2. Job control number
3. Sequence control number
4. Work Unit Code - Job control number
-
Maintenance was performed on an item identified by a Work Unit Code. What type
of code describes this action?
1. Manufacturer’s
2. JCN
3. Malfunction
4. Action Taken - Action Taken
-
What type of code identifies a subassembly repair action that is completed separately
from the major component repair action?
1. JCN Suffix
2. Type Equipment
3. support
4. Malfunction - JCN Suffix
-
What type of code identifies the system, specific engine, or component/part on which work is being performed?
1. Transaction code
2. Malfunction Description code
3. Type Equipment code
4. Work Unit Code - Type Equipment code
-
What type of code describes the trouble or cause of trouble in a system or component?
1. Transaction code
2. Action Taken code
3. What type of code describes the trouble or
cause of trouble in a system or component?
1. Tran - Malfunction code
-
What code is often referred to as the manufacturer’s code?
1. JCN
2. CAGE
3. WUC
4. WCC - CAGE
-
An aircraft has 479 flight hours on it since new. You have just removed and replaced a damaged canopy. What entry should you
place in the Time/Cycles block on the
VIDS/MAF?
1. E0479
2. A4790
3. A0479
4. E4790 - A0479
-
A Technical Directive Status code consists of how many characters?
1. One
2. Two
3. Three
4. Four - One
-
SE Custody and Maintenance History Record, OPNAV 4790/51, is used for
which of the following purposes?
1. To record custody and transfer information
2. To provide rework and overhaul data
3. To identify applicable and
incor - All of the above
-
Of the following equipment, which one requires an OPNAV 4790/51 card?
1. PME equipment
2. Engine test cells and stands
3. GB1As
4. VAST stations - VAST stations
-
On initiation of each new OPNAV 4790/51, reporting custodians retain the latest
processed copy from the permanent custodian. A current copy is also
maintained with any accumulated data transcribed to it.
1. True
2. False - True
-
What document provides scheduled control
of the predictable maintenance workload?
1. SE Custody and Maintenance History
Record
2. VIDS/MAF
3. MDs report
4. Monthly Maintenance Plan - Monthly Maintenance Plan
-
At the organizational level, what officer sets the format and arrangement of the
monthly maintenance plan?
1. The maintenance material control officer
2. The quality assurance officer
3. The aircraft maintenance officer
4. - The aircraft maintenance officer
-
At the organizational level, the MMP is distributed by what day of the month prior
to the month to which it applies?
1. 1st
2. 5th
3. 15th
4. 25th - 25th
-
Which of the following information is
included in the MMP?
1. Current list of QARS
2. High-time components
3. Schedule of technical training
4. Each of the above - Each of the above
-
. To increase technical knowledge levels and
enhance and improve existing formal
training through diagnostic testing
procedures is the primary goal of which of
the following programs?
1. PQS
2. MTIP
3. FRAMP
- MTIP