AMMO 2
Terms
undefined, object
copy deck
- When using drill, the first thing you do is...
- make sure the diameter of the hole to be drilled is within the capacity of the drill.
- which diameter(in inches) electric saw blade is the most commonly found in the maintenance activities?
- 8 in.
- An electric saw's blade must be operating at what speed before it contacts the material being cut?
- Full
- How many pounds per square inch (psi) of clean,dry air are required at the tool end of the air hose to ensure safe and efficient operation of the tool ?
- 90 PSI
- which pneumatic impact tool is designed for installing or removing nuts and bolts?
- wrench
- At what variation in pounds of pressure, while using an impact wrench, can the excess pressure become serious?
- 5 lbs of pressure
- what is the most common type of sling used in your everyday job ?
- wire rope
- Hoist hooks must be replaced when they have more than?
- 15 percent in excess of normal throat opening or more than 10 degree twist from the plane
- The common practice that applies to any meter is always?
- verify that power is off when connecting the meter.
- which meter is a four wire kelvin digital ohmmeter used for testing AIM-9 and the AIM-120 missile system?
- AMTEC 620
- which tester is a stable precision instrument designed primarily for the testing of solid-fuel rocket motor igniter bridge wire circuitry
- 101-5BFG
- the maximum load capacity of the MHU-141/M trailer is ?
- 5,500 lbs
- The steering system on the MHU-141/M trailer has a turning radius of ?
- 200 Inches
- When the Mhu-141 trailer is loaded or towed with the hinged deck open, what must be done?
- the two deck-panel supports must be properly positioned and locked in place with quick-release pins.
- The parking brake on the MHU-110/M trailer affects how many wheels?
- Four inboard rear wheels
- What is the maximum capacity of a pair of rail extender assemblies used with the MHU-110/M?
- 3,000 lbs
- How many trolley and chock assemblies are supplied with the MHU-110/M ?
- 20 trolleys and 40 chocks
- What is the maximum load capacity of the MHI-226 trailer?
- 12,000 lbs
- How many openings are on the deck of the MHU-226 trailer?
- 3
- What ensures the smooth transfer of HCU-6/E pallets from a rollerized trailer to an aircraft/ K loader?
- An adjustable ramp
- The moving of munitions and weapons from one base to another, depot to base, base to depot is called?
- a logistical movement
- Movement to support on-base operations to or from the flight line is called?
- an operational movement
- Which life truck has a manually extendible wheelbase?
- MHU-83 series bomb-lift truck
- The purpose of the transport beam beneath the lift arm assemblies on the MJ-1 series lift truck is to ?
- provide added support and to relieve excess hydraulic pressure from the lift arms in carrying loads for long distances
- what is the lifting capacity of the MJ-1?
- 3,00lbs
- When using MJ-1 lift truck extension lift arms, you immediately?
- reduce its lifting by 1,000lbs
- what is the lifting capacity of the MHU-83 series lift truck ?
- 7,000lb
- what is the drawback to using the hydraulic hand pump to build hydraulic pressure on the MHU-83B/E?
- Extremely slow way to build hydraulic pressure.
- what the minimum and maximun frame-width adjustments of the MHU-83B/E?
- 70 in;140 in
- how do you adjust the yaq on the MHU-83B/E?
- Hydraulically
- what is the rated capacity of air per minute needed for the MC-7 air compressor to discharge 100 psi of pressure?
- 125 cubic feet
- The MC-7 air compressor is designed for ?
- general maintenance
- The diesel model of the MC-7 air compressor is capable of operating up to how many hours at a time without refueling
- 8 hours
- the unique and handy feature of the bobtail truck's center pintle hook is that it can be ?
- moved in, out, or sideways for ease by about on half
- what is the primary difference between a bobtail and a pickup ?
- the botail's back end in shortened by about one half
- what AF form is used to document a daily inspection on a general cargo truck ?
- 1800
- what is the purpose behind good operator maintenance of all assigned vehicles?
- maintain vehicle serviceability at reduced cost.