NAVEDTRA 14353 Aviation Boatswain's Mate H 2
Terms
undefined, object
copy deck
- what is the name of manual NAVEDTRA 12085?
-
Use and Care of Hand Tools and Measuring Tools
p.1-1 - what must be in place before cutting tools are used?
-
safety glasses
p.1-1 - what should never be used for general maintenance?
-
crash tool roll kit
p.1-1 - what manual should you seek for safety precautions as well as the manufacture's safety precautions?
-
OPNAVINST 5100.19
p.1-1 - what are the main parts that make up the construction of the standard screwdriver?
-
1)the handle
2)the shank
3)the end
p.1-1 - what part of the standard screwdriver is the blade?
-
the end
p.1-1 - what is the proper fit for a standard screwdriver?
-
at least 75%
p.1-1 - what is the proper fit for a phillips head screwdriver?
-
100%
p.1-1 - are reed and prince screwdrivers interchangeable with Phillips screwdrivers?
-
reed and prince screwdrivers are not interchangeable with phillips screwdrivers
p.1-1 - how many degrees are the flukes of the phillips screwdrivers?
-
about 30*
p.1-4 - how many degrees are the flukes of the reed and prince screwdrivers?
-
about 45*
p.1-4 - between the phillips and reed and prince screw slot which is the deepest?
-
the reed and prince is deeper than the phillips screw slot
p.1-4 - what type of end does the reed and prince and the phillips screwdriver have?
-
reed and prince=blunt end
phillips=shaper, pointed end - the outline of the end of which screwdriver is approximately a right angle?
-
reed and prince screwdriver
p.1-4 - which pliers are manufactured with straight serrated jaws for gripping objects?
-
combinations jaw pliers
p.1-4 - what type of screws are generally used for airframe structural applications?
-
the Reed and Prince screws
p.1-4 - what type of screws are generally used for component assemblies?
-
the Phillips screws
p.1-4 - what type of pliers are manufactured with straight serrated jaws for gripping objects?
-
combination jaw pliers
p.1-4 - what type of pliers are designed specifically for cutting?
-
diagonal pliers
p.1-4 - what tool is often referred to as "knuckle busters"?
-
the crescent adjustable wrench
p.1-4 - when using the crescent adjustable wrench, in what direction should the force be exerted?
-
pull the handle toward the side having the adjustable jaw
p.1-4 - what is the most common adjustable pipe wrench?
-
the Stillson
p.1-4 - when using the Stillson wrench which jaw should provide the twisting force?
-
in such a manner that the fixed jaw provides the twisting force
p.1-4 - on soft metal such as brass or on chromium-plated or machined surfaces what type of wrench should be used?
-
the strap wrench
p.1-4 - wht hammer is most used by the ABH?
-
the ball peen
p.1-4 - what tool is a portable metal cutting tool that can be used for cutting sheet metal, bolts, and pipes?
-
the hacksaw
p.1-4 - on what stroke does the hacksaw cut?
-
on the push stroke only
p.1-4 - the blade a hacksaw should be installed in what manner?
-
in the frame with the teeth facing away from the handle
p.1-4 - what type of tool is is designed for prying boards from crates, pulling spikes or heavy nails, and as a lever for moving heavy objects short distances?
-
wrecking bars
p.1-5 - which wrecking bar is used for damage control functions as well as on crash trucks on shore stations?
-
the Johnson bar
p.1-5 - what tool is sometimes called the all-purpose tool?
-
the wrecking bar
p.1-5