Start Studying!
Add Cards ↓
Deck Info
Description
Tags
Other Decks By This User
- Because a CPU needs a lot of heat, it usually needs a _______ and a _______
- cooling fan, heat sink
- A heat sink is made of _______ or ________ usually
- copper or alluminum
- A heat sink is made of copper or ________ usually
- alluminum
- A heat sink is made of _______ or alluminum usually
- copper
- True or False:
Usually you can't remove the cooling fan, but sometimes you can
- False, sometimes you can't but usually you can
- CPU's today almost always come in a _________ (rather than an SEC, etc)
- PGA, Pin Grid Array
- What does PGA stand for?
- Pin Grid Array
- The first 8088 Intel CPU had a clock speed of _____
- 4.77 mhz
- Older CPU's can come in the SEC. What does the SEC stand for?
- Single Edge Cartridge
- true or false: A Slot 1 and a Slot A are mechanically different
- false
- When you intstall a PGA CPU, make sure you don't touch the _______
- pins
- Broken _______ on a PGA CPU will ruin it
- pins
- To fix a bent pin CPU for a ZIF socket, use a ______ mechanical pencil w/o lead.(Be careful!)
- 0.9mm
- When installing a CPU into a ZIF socket, you should first lift the ______________
- ZIF arm
- Make sure the ________________ line up on the CPU and ZIF socket when installing it.
- orientation notches
- true or false: When installing a CPU into a ZIF socket, make sure the CPU is all the way in(no visible pins) then snap the ZIF arm
- true
- orientation markers are also called___________
- index corners
- true or false: orientation markers are designed to help you align the CPU correctly
- true
- true or false: incorrectly installing the CPU will never destroy the CPU or motherboard
- false, it often destroys both
- index corners are also called_________
- orientation markers
- When installing a Slot 1 or Slot A, first install the _____________
- CPU mount
- always add a small amount of __________ before you mount the fan
- heat compound
- heat compound is also called _________ or __________
- thermal paste or heat dope
- Any ______________ stores heat sink compound
- electronic store
- The P-II heatsink is installed on the ________ side of the package
- unlabeled
- Arctic Silver is an important brand of
- thermal compound
- True or false: Special notches make it impossible to install the SEC incorrectly
- true
- True or False: With an SEC, if it does not go in easily it is probably correct.
- False
- After installing a SEC CPU, be sure to install the fan's ________
- power
- thermal paste is usually what color:
- white
- True or false: YOu should install a PGA before you install the fan.
- true
- Before installing the fan on a PGA CPU, you must add a small amount of__________
- heat sink compound
- true or false: In most cases, when installing a fan on PGA CPU you do not need to apply a fairly strong amount of force to snap the fan into place
- false
- true or false: You should make sure your fan can work with your PGA cpu package
- true
- True or false: Some Socket 370 fans will crack the ceramic casing on a Socket A Duron
- true
- To install a fan for a PGA CPU, look for a power connection on the __________
- motherboard
- true or false: Most motherboards clearly mark the connector for a power connection from a PGA CPU.
- true
- True or false: the word size is never called the internal data path.
- false
- This is the largest number of bits the CPU can process in one operation.
- Word Size
- Is the Pentium a true multi processor?
- yes
- How many ALU's does a Pentium have?
- 2
- What is the external path size of a Pentium?
- 64 bit
- How many 32 bit internal paths does a Pentium have?
- 2
- How many bits were the two Pentium internal paths?
- 32 bit
- What range of processor speed did the Classic Pentium have?
- 60 to 200 MHz
- Did the classic pentium have L2 Cache?
- no
- What was the system bus speed of the Classic Pentium?
- 66 MHz
- ETC is a type of L______ 1 ________
- Level 1 Cache
- This Level 1 cache used in the PR stores lists of operations that have been decoded and are waiting to be executed.
- Execution Trace Cache
- This Intel processer uses Socket 423 and Socket 478 and LGA 775
- Pentium IV
- This type of Intel proceser debuted with a 400 Mhz system bus, using four data transfers per cycle.
- Pentium IV
- The LGA775 is different from PGA sockets because...
- the pins are on the motherboard and not the processor
- ___________ is an eighth-generation x86 architecture microprocessor produced by Intel, meant to replace Netburst.(Answer is not Itanium)
- Core 2
- True or false: The Pentium D is a single core processor
- false
- ____________is Intel's trademark for their implementation of the simultaneous multithreading technology on the Pentium 4 microarchitecture
- Hyper Threading Technology
- When was the first Pentium 4 released?
- 2000
- When the Pentium IV was first introduced, what PGA package did it use?
- 423 pin PGA package
- When the Pentium IV was first introduced, what PGA package did it use?
- 423 pin PGA package