COMNAVAIRFORINST 4790.2
Terms
undefined, object
copy deck
- What does the AT code 1 on the MAF mean?
- Repair Not Authorized. BCM 1
- What does the AT code 2 on the MAF mean?
- Lack of Equipment, tools or facilities. BCM 2
- What does the AT code 3 on the MAF mean?
- Lack of technical skills. BCM 3
- What does the AT code 4 on the MAF mean?
- Lack of Parts. BCM 4
- What does the AT code 5 on the MAF mean?
- Fails Check and Test. BCM 5
- What does the AT code 6 on the MAF mean?
- Lack of Technical Data. BCM 6
- What does the AT code 7 on the MAF mean?
- Beyon Authorized Repair Depth. BCM 7
- What does the AT code 8 on the MAF mean?
- Administrative. BCM 8
- What does the AT code 9 on the MAF mean?
- Condemned. BCM 9
- What does the AT code A on the MAF mean?
- No repair required
- What does the AT code B on the MAF mean?
- Repair and Replacement of items such as attaching seals gaskets, packing, tubing, ets. The parts are not identified by a WUC.
- What does the AT code C on the MAF mean?
- Repair
- What does the AT code D on the MAF mean?
- Work Stoppage, Post and Predeployment and Inter-IMA support. D-action Used only when Trans Code is 31 or 32.
- What does the AT code F on the MAF mean?
- Failure of item undergoing Check and Test.
- What does the AT code J on the MAF mean?
- Calibrated, No adjustments required
- What does the AT code K on the MAF mean?
- Calibrated. Adjustments Required
- What does the AT code L on the MAF mean?
- Work Stoppage. Awaiting parts.
- What does the AT code N on the MAF mean?
- Work in Progress--Close out
- What does the AT code P on the MAF mean?
- Removed. Used when the item is removed and only the removal is to be accounted for.
- What does the AT code Q on the MAF mean?
- Installed. Only the installation action is to be accounted for.
- What does the AT code R on the MAF mean?
- Remove and Replace. The removed item must be identified by a WUC; for Trans Code 11 by an assisting w/c when primary w/c used AT code R, the items processed has to be '0'; Trans Codes 18 or 19 only when WUC items are time sensitive and require logbook entries; for Trans Codes 23 or 25.
- What does the AT code S on the MAF mean?
- Remove and Reinstall. Limited to Mal Codes 800, 804, and 811.
- What does the AT code T on the MAF mean?
- Removed and Replaced for Cannibalization.
- What does the AT code Y on the MAF mean?
- Troubleshooting
- What does the AT code Z on the MAF mean?
- Corrosion Treatment.
- What does the AT code 0 on the MAF mean?
- Record look phase man-hours for acceptance, transfer, special, conditional, major a/c and combined airframe and engine speial inspection...
- The determination to use BCM 8 for excessive backlog is made by Who?
- Jointlly by the maintenance and supply officers.
-
True or False.
BCM 8 requires SECNAV approval. - False, it requires ACC/TYCOM approval.