- At what point up the 2W0 career ladder does the supervisory level begin?
- 2W071, craftsman.
- Besides the missile itself, what other items should be considered under missile safety for their mishap potential?
- Ground support and operational requirements, personnel, and the operational environment.
- Define maintainability.
- The measure of the ability of an item to be retained in or restored to a specific condition when maintenance is performed by personnel having specific skills, using prescribed procedures and resources, at each prescibed level of maintenance and repair.
- Define reliability.
- The ability of a system and its parts to perform its mission without failure, degredation, or demand on the suport system.
- During contingency operations, who establishes lower echelon ammunition control points?
- MAJCOMs.
- Each item approved for bench stock is assigned a 14-digit document number consisting of what elements of data?
- Activity code, orginizational code, shop code, date of last demand, item number.
- Explain INRAD
- Intrinsic Radiation, the ionizing radiation emitted from the radioactive materials in the compounds of a nuclear weapon.
- Explain the main purpose of vegetation control.
- Limit the probability of conbustable vegetation causeing an unacceptable hazard to munitions in storage.
- Explain the structure of a typical wing in descending order.
- numbered AF -> wing -> group -> squadron -> flight ->section -> elements.
- Explain which type of items fall into hazard class/division 1.5?
- Very insensative items which have a mass explosive hazard.
- Give an example of when a NDA may be used?
- If military aircraft needed to be directed to a civilian airport.
- How are MAJCOMs organized in the United States?
- By functional basis.
- How are MAJCOMs organized overseas?
- By geographic basis.
- How are name entries made on AFTO IMT 244?
- First name initital, last name, and employee number.
- How can you activate the online user's manual in the TMRS program?
- Stroke the F5 key while in the system.
- How do failure trents fit into the RAMS program?
- They can be ascertained on this system and may effect engineering changes resulting in systems improvement.
- How does analysis of the collected data assist managers?
- To ID problem areas.
- How is a typical munitions flight broken down?
- Into 3 sections, productions, systems, material, then into elements.
- How many functional areas does a trainee need to be certified on to upgrade to the 5-skill level, 7-skill level, and 9-skill level?
- 5 level - 1.
7 level - 2.
9 level - 4. - How many spare containers should a unit retain?
- Enough to break down all built up complete rounds.
- How often should bench stock items be replenished?
- When the quantity on hand is equal or less than 50% of the authorized amount.
- Identify the subdivisions of the 2W career field (excluding 2W0X1) and their specific responsibilities.
- Aircraft Armament - loading and unloading nuclear and non nuclear munitions, explosives, and propellant devices on aircraft.
Nuclear Weapons - performs and mananges maintenance, storage, inspection, modification, accountability, and repair of nuclear wea - If a Maintenance Squadron exceeds 700 authorized positions, who may authorize it to be split up into Equiptment Maintenance Squadron and a Component Maintenance Squadron?
- MAJCOMs.
- If overhead protection is not available, what can you use to protect critical assets?
- Use barrier materials to protect critical assets.
- If you want to find the career field progression requirements, to what section of the CFETP Part I would you refer?
- Section B.
- In a typical munitions activity, what section assembles, disassembles, delivers, inspects, and maintains conventional munitions, missiles, containers, and dispensers?
- Production Section.
- In a typical munitions activity, what section plans, schedules, controls, and directs munitions activities and in-process accountable transactions in CAS whne relayed from other munitions activities?
- Systems Section.
- In a typical munitions activity, who must ensure pre-task safety briefings are accomplished before the start of any munitions operation?
- Munitions crew chiefs.
- In a typical munitoins activity, who focuses on flight line munitions support by using resources effetively and communicates with munitions control, flight line activities, and munitions tow-teams to meet all munitions requirements?
- Munitions Expediter.
- In a typtical munitions activity, what section receives stores, warehouses, handles, breaks out, inspects, ship, inventories, transports, disposes locally, and processes transactions in CAS for conventional munitions, containers, dispensers, and training
- Material Section.
- List four ways to reduce the time spend near nuclear weapons.
- planning work before operation, gathering necessary tools, tech data, and materials before working, avoid unnecessary work near weapons, and consolidate work.
- List the four qualifications a supervisor must have concerning explosive safety.
- Knowledge of all hazards involved, convey emergency procedures to visitors and workers, maintain strict housekeeping standards, and know what steps to take when abnormal conditions arise.
- List the major goals of the AF nuclear surety program.
- To acheive maximum safety consistent with operational requirements, maintain record of 0 accidental or unauthorized nuclear yields, and reduce potential for nuclear mishaps.
- List the primary methonds to achieve the ALARA concept.
- Minimize the time spent near nuclear weapons, increase personnel distance rom weapons systems, use shielding, take a combination of these actions.
- List three administrative indicators of OPSEC vulnerability.
- Transportation arrangements, leave cancellations, schedules/orders/flight plans/duty rosters.
- List three communications indicators of OPSEC vulnerability.
- power sources, call signs, transmitter locations.
- List three logistics and maintenance support indicators of OPSEC vulnerability.
- Prepositioned equiptment, technical reps, maintenance activity.
- List three mandatory selection requirements a person must meet prior to being placed in a PRP posistion.
- No history of drug abuse, US citizen or US national, and have a required security clearance.
- List three operations indicators of OPSEC vulnerability.
- specialized training, specialized equiptment, rehersals of operations.
- List two items that controlling activities should do when operating in a contaminated environment.
- 1. ensure contaminated areas and equiptment are conspiculously marked.
2. Limit personnel movement to only those conducting critical mission operations. - List two of the benefits that contamination avoidance provides.
- Increasing survivability and reducing time personnel are required to wear protective clothing.
- Long-life containers should withstand at least how many trips?
- At least 100.
- MRA and MAQ aer terms associated with bench stock items when stock levels are not determined by what method?
- Levels not based on consumption.
- Munitions systems superintendents are usually in what grade or grades?
- E-8, Senior Master Sergeant.
- Name the four areas where you might work.
- restricted areas, controlled areas, national defense areas, close-in security areas.
- Name the MDD system used at most bases to document daily maintenance actions.
- Integrated maintenance data system (IMDS).
- Name the three general functional areas of the 2W career field?
- Munitions systems, aircraft armament, and nuclear weapons.
- Name the three red symbols from the most serious condition to the least serious condition.
- RED X - Most serious condition
RED - - next most serious condition
RED / - least serious condition. - Name the two control points HQ AFMC establishes entities.
- AF ACP and AF TMCP.
- New airmen who have completed basic training are assigned what title and AFS code in the 2W0 career field until they are upgraded to the 3-skill level?
- 2W011, Munitions Systems Helper.
- Normally, who conducts the ASC review, and who is involved?
- The MAJCOM, the subject matter experts.
- Short-life containers should withstand at least how many trips?
- At least 10.
- TACPs operate at what level?
- The MAJCOM level.
- The DOD hazard classification system is based on the system recommended for the international use by which organization?
- The United Nations.
- What AFS identifies a semi-skilled individual
- 2W051.
- What AFSC is assigned to personnel while in basic training?
- 9T000
- What are some of the resources to consider during a site survey?
- Facilities, vehicles, age, mmhe, tools and equipt, communications.
- What are the criteria for the selection and retention of individuals who work around nuclear weapons per AFI 36-2104?
- Individuals are emotionally stable and have demonstrated good judgement and professional competence.
- What are the duties and responsibilites of a 2W071
- Supervise assigned personnel and operations in performance and plan munitions material management repsonsibilites.
- What are the for terms used to describe the types of maintenance performed on munitions equiptment?
- Preventitive, periodic, unscheduled, and in-process/end-item inspections.
- What are the four categories of the CIICs?
- classified, sensitive, pilferable, unclassified.
- What are the principle hazards of hazard class/division 1.1?
- The blast and mass detonation.
- What are the radiation limits for occupationally exposed workers and pregnant females?
- Workers: 5 rems/year. Pregnant females: 500 mrems/year during pregnancy.
- What are the three levels of maintenance?
- Organizational, intermediate, and depot.
- What are the two advantages of establishing a bench stock?
- 1. Required items are on hand.
2. Maintenance personnel have control of their matterial. - What are the two conditions required for an OPSEC vulnerability?
- 1. a weakness that could reveal critical information
2. An adverary with both intent and capability to exploit that weakness. - What are the two disadvantages of establishing a bench stock?
- 1. Shop where supply is located must provide a secure location.
2. Unit funds must be spent to set up holding bins and cabinets for bench stock items. - What are the two major categories of human factors contributing to hazards in the work place?
- Mental and physical.
- What are the two PRP positions?
- Critical and controlled.
- What are two requirements a container must meet before it is considered reusable?
- 1. Have all its components and be in good repair.
2. Protect unservicable items against further deterioration. - What can be used to remove chemical agents in dust form?
- A 5% chlorine solution.
- What chemical decomanination kit is used on equiptment and munitions?
- M295 kit.
- What conference is used to revise or change the CFETP?
- Utilization and Training workshop (U+TW).
- What criterion is used to subdivide ammunition and explosives into hazard classes?
- The nature of the hazard and its potential for injury or damage.
- What distance is a boundary for a close-in security area from the resource?
- no closer than 10 ft, no greater than 60 ft, unless IDS is installed.
- What does the missile update menu allow you to do?
- Update complete missile record, missle component data, missile periodic inspection data, missle IPI data, missile TCTO date, missile location data, missile flight hour data, and missile component failure information.
- What does the theater munitions program provide?
- out year munitions inventory and requirements for selected munitions based on the DLAR.
- What duties and responsivilities for specific skill levels of a specialty are not described in the AFECD
- Unique base and MAJCOM requirements.
- What engineering design cannot reduce radiation exposure to acceptable levels, what other methods are used?
- Personal protective procedures and administrative controls.
- What form is used to increase or decrease allowance standards?
- AF IMT 601.
- What form is used to report a hazard?
- AF Form 457, USAF Hazard Report (HR).
- What information is recorded on AFTO IMT 244?
- maintenance, inspection, and historical data for support equiptment and training equiptment.
- What initiates the supporting and supported command to develop a course of action?
- A warning order.
- What is an OPLAN?
- Operational plan, any plan, except SIOP, for the conduct of military operations.
- What is static electricity?
- A hazard created when charges accumulate to the point where an uncontrolled discharge occurs through, or in the presense of, a hazardous substance suseptable to initiation.
